If you have mold in your Brownsville home, waiting is the one thing that makes it worse. Mold removal in Brownsville, TX is time-sensitive work. Once water reaches drywall, carpet, or framing, the EPA’s own guidance is that materials not dried within 24 to 48 hours will usually start to grow mold. The first step is an honest look at the problem, not a sales pitch: if you do not need remediation, we will tell you, and there is no charge for the visit.
Most people who call us are not sure whether what they are looking at is mold, mildew, or just a stain. That is fine. We help homeowners and property managers across the Rio Grande Valley find the moisture, remove the mold, and repair the water damage that let it in.
Found it in the middle of the night? Photograph everything before you touch anything, leave the mold itself alone, and call or send the quote form whatever the hour. You will hear from us the same day, and dated photos taken before cleanup are the strongest evidence your insurance claim can have.
Call 956-203-0552 for a free, no-obligation quote. We answer same day and serve Brownsville, San Benito, Los Fresnos, Port Isabel, Laguna Vista, Harlingen, and the rest of the RGV.
Why homeowners across the Valley call us first
We are different in three ways that matter.
- We treat mold as a health problem first. Mold behind a wall is not cosmetic, and the people who breathe that air the most are usually the ones home the most: kids, older parents, and anyone already managing asthma or allergies. That is why the first visit happens fast.
- We tell you the truth about Texas mold law, including the parts that work in your favor, starting with the one most companies skip: the company that removes your mold legally cannot be the same one that tests it and signs off.
- We document the job for your insurance claim. Dated photos, moisture readings, and a written record of the cause, assembled as the work happens, so your claim file exists before the adjuster ever asks for it.
Mold remediation in Brownsville
When mold has taken hold, cleaning the surface is not enough. The spores you can see are a fraction of the problem. Our mold remediation in Brownsville service isolates the affected area, removes the contaminated material, and treats what stays, so the mold does not simply come back in a few weeks. For any job over 25 contiguous square feet, Texas law requires containment with negative air pressure and a specific set of steps. Waiting turns a contained, one-room job into a demolition project, so the sooner we see it, the less it costs you.
Water damage restoration
Mold is usually the second problem; water is the first. Whether it came from a burst supply line, an overflowing AC drain, a sewer backup, or storm flooding, the water has to come out and the structure has to be dried before mold gets its 24-to-48-hour head start. Our water damage restoration service covers extraction, structural drying with commercial equipment, and the moisture documentation your insurer will want. Getting the structure dry fast is the single best way to keep a water loss from turning into a mold loss.
Commercial mold removal
A closed restaurant, office, or apartment unit costs money every hour it stays shut, and you may have tenants or a health inspector waiting on an answer. Our commercial mold removal service is built around keeping you open, with off-hours scheduling, containment that keeps adjacent spaces usable, and reporting that satisfies both insurance and code. We work with property managers and multi-family landlords across Brownsville, where roughly 40% of homes are renter-occupied and mold questions between tenants and owners come up constantly.
How mold testing and clearance work under Texas law
Texas draws a hard line through every mold job: the company that removes your mold cannot be the same one that tests it and signs off that it is gone. Testing and clearance belong to an independent licensed assessor, someone with no stake in the size of the job, and that independence is exactly what protects you. So we do not sell mold testing as a service. When a job needs testing, we coordinate with an independent licensed assessor and work from their written protocol, following how mold testing and clearance work under Texas law from the first assessment to the final sign-off.
Our free visit is a remediation estimate, not an official assessment. We look, tell you what your next step is, and put a price on it if the job is ours to do. And you do not need a lab test before you call: when mold is visible, the EPA says sampling is usually unnecessary, and Texas does not require the licensed process below 25 contiguous square feet.
Call 956-203-0552 if any of this sounds like your house. We will give you a straight answer and a real number.
How a mold removal job works, step by step
Every home is different, but a proper job follows the same four stages:
- Assess. We find the moisture source and the extent of the mold. For larger jobs, an independent licensed assessor writes the protocol that governs the work.
- Contain. We seal off the affected area and, on jobs over 25 square feet, put it under negative air pressure so spores do not spread into clean rooms while we work.
- Remove. We take out the contaminated porous material, often drywall, insulation, or carpet, then HEPA-vacuum and treat the surfaces that stay. Bleach is not part of this on porous materials; the EPA does not recommend it there.
- Clearance. An independent licensed assessor tests the area while containment is still up, and once it passes, the Certificate of Mold Damage Remediation is issued.
Fixing the water source is part of the job, not an afterthought. As the EPA puts it, the key to mold control is moisture control.
The neighborhoods and cities we serve
Mold moves fast here. Brownsville runs among the most humid cities in Texas, with morning humidity near 89 percent, and the heaviest rain arrives not in August but in September, in flash-flood bursts that have put water inside local homes four times in the last eight years. Slab foundations with no basements give that water nowhere to go, and an air conditioner running nearly year-round adds moisture of its own. That is the backdrop for every job we do.
We cover Brownsville and the surrounding Rio Grande Valley: Southmost, historic downtown, West Brownsville, Rancho Viejo, and the neighborhoods along the resacas, the more than 50 miles of old Rio Grande channels that wind through the city and capture stormwater runoff. Beyond the city we serve San Benito, Los Fresnos, Port Isabel, Laguna Vista, Olmito, and Harlingen. Much of Brownsville’s housing is older than people assume. The median home was built in 1993, nearly a third of the housing stock predates 1980, and older slab homes are exactly where storm-driven moisture problems tend to show up.
Call 956-203-0552 for a free quote anywhere in the RGV, or send a message with the quote form on this page and we will call you back the same day.
Frequently asked questions
How much does mold removal cost in Brownsville? There is no honest flat price, because cost tracks the size of the affected area, how much material has to be removed, and whether the job needs containment. A small spot under 25 contiguous square feet may be something you can handle yourself; once a job crosses that line it becomes licensed work with containment and formal steps, which costs more. We give free, no-obligation quotes so you get a real number for your specific situation instead of a guess.
Why do mold removal quotes vary so much? Two quotes on the same house can look very different because they are not always for the same work. A low number often leaves out containment, testing, or the formal steps Texas requires above 25 square feet, or it comes from a crew that is not licensed to do the job at that size. Compare what each quote actually includes, not just the number at the bottom. A minute on the public license search at tdlr.texas.gov, run by the state agency that licenses mold work in Texas, shows you any company’s license status and complaint history.
Can one company both test for mold and remove it in Texas? No. Texas law prohibits the same company from performing both the assessment and the remediation on one project. If a company offers to test your mold and then remediate it themselves, they are describing something the law does not permit. The testing and the final clearance have to come from an independent licensed assessor.
Does homeowners insurance cover mold? It depends on the cause. Most Texas policies cover mold that results from sudden, accidental water damage like a burst pipe, and exclude mold from gradual leaks or wear. Flooding is not covered by a standard home policy at all. You need a separate flood policy, and even that can exclude mold if the home was not dried out after the water receded.
Can I just remove the mold myself with bleach? On your own home, Texas lets you do your own remediation at any size, but you give up the certificate that only a licensed remediator can issue, and the liability and insurance protections attached to it. As for bleach, the EPA does not recommend it for mold on porous materials like drywall, where it does not reach the root of the problem. And if the moisture is not fixed, the mold comes back.
How long does mold removal take, and do I have to move out? Small, contained jobs can be done in a day or two; larger jobs that require containment and an independent clearance test take longer. You often do not have to leave, because the point of containment is to seal the work area off from the rest of the house. We will tell you what to expect for your specific job before we start.
Can black mold make my family sick? Mold in the home is commonly linked to allergy and asthma-type symptoms, and the people most affected tend to be children, older adults, and anyone with a breathing condition. The most reliable thing you can do for your family’s health is to control the moisture that feeds it.
Ready when you are. Call 956-203-0552 for a free, no-obligation mold removal quote, or use the quote form on this page and we will get back to you the same day.